Water softener installation in Oconomowoc, from first test to zero
Oconomowoc's published hardness spans 320 to 420 milligrams per liter and rose between reports, so an installation here starts with a test of the water at your house, not the city average. The work itself is done by a plumbing contractor licensed by the state, and it ends on a zero reading at your tap.
Call (262) 829-5961Mon to Fri, 7am to 5pmInstall day in an Oconomowoc basement
Any old softener comes out first. The new resin tank and brine tank stand where the water line enters, the plumber ties the bypass valve into the line, and the drain line gets routed to an air gap above a drain.
Then comes the RO drinking faucet, up at the kitchen sink. Hardness was measured before the first wrench turned; once the softener is running it is measured again at a faucet, and the plumber is not done until that number is zero.
Where it goes in an Oconomowoc house
Softeners go wherever the water line enters the house, which tends to be a basement, utility room or garage, and they need a drain and an electrical outlet nearby. Your plumbing picks the spot, not the emptiest corner.
Describe that spot on the call, along with any softener already in it. Add your address and the size of your household, and we have what we need to size and price the system.
Why a plumber handles this part
Under Wis. Stat. ch. 145, hooking a softener's drain line to your house drain, air gap included, is plumbing work. So the job belongs to a state-licensed plumbing contractor, not a delivery crew.
We stay on our side of that line: the sizing, the equipment and the scheduling.
Why the test at your tap matters more than the report
Oconomowoc's earlier report averaged 317 milligrams per liter and the current one averages 375. When the official figure moves like that between reports, a reading taken at your own faucet is the honest place to start.
The final check works the same way in reverse. It looks at softened water coming out of your faucet, and it gets repeated until no hardness registers.
Common questions
Does anyone come out before install day?
No. The price is fixed on the phone, so the first person at your house is the plumber, there for the installation.
Does the RO faucet go in on a separate trip?
No. Same visit: the plumber mounts it at the kitchen sink once the two tanks are in place.
Will the softener be set from the city's 375 average?
No. The city average is useful for the conversation, but the setting comes from the test at your tap, which is the water the softener will actually see.
What if my home is in Summit or Lac La Belle, on a well?
The installation is the same. What changes is the starting number: with no utility report for a private well, the test at your tap and any lab results you share fill that role.